Seminar “Analytical equipment and software solutions for laboratories”
For the Analyzer LLC company
Eluent supply
The accuracy and reproducibility of the HPLC system is largely determined by the pump characteristics.
The S-1100 analytical pump combines the most important components of a first-class pumping system.
Pump Configurations
- with a binary gradient on the high pressure side with minimal dead volume and the ability to create fast gradients with high precision mixing of two eluents
- with a gradient on the low pressure side for reliable mixing of up to 4 eluents
- cost-effective isocratic version for routine analyses
Pump S-1100
Two-plunger pulsationless pump with automatic flushing of plungers, stainless steel or PEEK material.
The feed rate of the eluent is from 0.01 to 5 ml/min
Flow rate maintenance accuracy +/- 0.1% RSD
The maximum pressure is 650 bar.
Formation of a binary gradient in a high-pressure line or by a low-pressure gradient generation module from 4 solvents.
Built-in leak sensor.
It is controlled by software or from the pump control panel.
Sample input
The sample can be entered using a manual dispenser or an S-1200 autosampler.
Automatic sample dispenser S-1200
A direct method of dispensing a sample from a needle.
Maximum working pressure 650 bar
Standard tripod, for 120 vials with a volume of 1.5 ml.
Optionally– a tripod for 3 tablets of 96 or 384 holes, optional. tripods.
The volume range of the dosed sample is from 1 to 100 µl in 0.1 µl increments
The sampling accuracy is 0.5% RSD, the linearity of dosing is more than 0.999.
Cooling of samples in a tripod in the range of 5-15 ° C.
Viola detection before sampling. Rinsing the needle before/after dosing.
Eluent supply
The accuracy and reproducibility of the HPLC system is largely determined by the pump characteristics.
The S-1100 analytical pump combines the most important components of a first-class pumping system.
Pump Configurations
- with a binary gradient on the high pressure side with minimal dead volume and the ability to create fast gradients with high precision mixing of two eluents
- with a gradient on the low pressure side for reliable mixing of up to 4 eluents
- cost-effective isocratic version for routine analyses
Pump S-1100
Two-plunger pulsationless pump with automatic flushing of plungers, stainless steel or PEEK material.
The feed rate of the eluent is from 0.01 to 5 ml/min
Flow rate maintenance accuracy +/- 0.1% RSD
The maximum pressure is 650 bar.
Formation of a binary gradient in a high-pressure line or by a low-pressure gradient generation module from 4 solvents.
Built-in leak sensor.
It is controlled by software or from the pump control panel.
Sample input
The sample can be entered using a manual dispenser or an S-1200 autosampler.
Automatic sample dispenser S-1200
A direct method of dispensing a sample from a needle.
Maximum working pressure 650 bar
Standard tripod, for 120 vials with a volume of 1.5 ml.
Optionally– a tripod for 3 tablets of 96 or 384 holes, optional. tripods.
The volume range of the dosed sample is from 1 to 100 µl in 0.1 µl increments
The sampling accuracy is 0.5% RSD, the linearity of dosing is more than 0.999.
Cooling of samples in a tripod in the range of 5-15 ° C.
Viola detection before sampling. Rinsing the needle before/after dosing.
